Borewell services
Borewell Drilling, Flushing and Cleaning Services in Chennai
New borewells, flushing and cleaning of old ones, and pump installation, with the plumbing to your sump and tanks handled by the same team.
- New borewell drilling
- Flushing & desilting
- Pump installation
- Domestic & industrial
Free site inspection before we quote
From choosing the point to water at the tap
We drill borewells for domestic, commercial and industrial use in all types of soil and rock, using rigs suited to the site. Before drilling, we help you decide the borewell point, and we recommend a groundwater survey where the yield is uncertain.
Old borewells lose yield as silt, sludge and scale build up. Flushing with pressurised water or air clears the bore and restores flow. After drilling or flushing we install the pump and complete the plumbing to your sump or overhead tank.
What's included
Borewell services
New borewell drilling
Drilling for houses, apartments, commercial and industrial sites in soil and rock.
Borewell point selection
Deciding the drilling point, with a groundwater survey recommended where needed.
Flushing and cleaning
Removing mud, sludge and debris from silted or low-yield borewells.
Casing and development
Casing pipe installation and development of the well after drilling.
Pump installation
Submersible and other pumps selected for depth and demand, with controls.
Plumbing to tanks
Delivery lines to sump and overhead tanks, and water quality testing on request.
What goes into a borewell quote
Borewell cost is quoted per site. These are the items that make up the price.
| Item | What it covers |
|---|---|
| Drilling | Charged on the depth drilled, which depends on soil, rock and water level |
| Casing pipe | Length and type of casing needed to hold the bore open |
| Pump and installation | Pump, cable, panel and fitting |
| Flushing and cleaning | Clearing the new bore after drilling |
| Rig transport | Moving the drilling rig to your site |
How it works
From your first call to a finished job
- Call, WhatsApp or send the formTell us what's wrong or what you're planning. Photos help.
- Site visitWe inspect, measure and listen to what you need.
- Itemised quoteMaterials and labour listed separately, before any work starts.
- Work, test and hand overOur team does the job, tests it and leaves the site clean.
FAQs
Borewell drilling & flushing: common questions
Can't find your answer? Ask us directly. We're happy to explain before you decide.
Which pumps are used for borewells?
Submersible pumps are the most common. Compressor pumps, jet pumps and solar submersibles are used in specific cases. We choose the pump based on depth, water level and how much water you need.
Will every borewell get water?
No borewell can be guaranteed to yield water. A groundwater survey by a geologist before drilling improves the chance of success, especially in areas with hard rock.
How often should a borewell be flushed?
Flush when the yield drops, the water turns muddy, or the pump starts running dry. In silt-prone areas, flushing every one to two years helps keep the yield.
Can borewell water be used at home?
Yes for washing and flushing. Borewell water in many parts of Chennai is hard or saline, so test it before drinking and consider a softener or treatment plant.
How is the borewell drilling charge calculated?
The quote covers drilling depth, casing pipe, pump and installation, flushing after drilling and rig transport. We confirm each item after seeing the site.
Can a dry borewell be revived?
Sometimes. Flushing can restore a silted bore, and rainwater recharge around the borewell helps the water table recover over time.
Borewell drilling & flushing
Get a free quote
Tell us about the job and we'll call you back to arrange a site visit and an itemised quote.
What happens next
- We call you back to understand the job.
- We visit at a time that suits you.
- You get an itemised quote before any work starts.
Prefer to talk now? Call or WhatsApp us.